Keyboarderforum by Musiker Lanze

Ergebnis 1 bis 7 von 7
  1. #1
    Musiker Lanze
    Gast

    Pfeil Alle bekannten bei Technics Keys verwendeten Dateiendungen

    Der Thomas von THKMCS bzw ein dort angemeldeter User hatte bezüglich der verschiedenen Dateiendungen mal eine Anfrage im Forum dort.
    Daraus hat nun der Thomas eine Übersicht bei sich auf der Page ins Net gestellt in der die einzelnen Dateiendungen mal aufgelistet wurden.

    Hier mal die Übersicht für eventuelle Interessierte:

    cmp[TAB]Composer (Rhythmen)[TAB]KN7000,KN6000,KN5000,KN3000,KN2000[TAB]
    pmt[TAB]Panel Memory[TAB]KN7000,KN6000,KN5000,KN3000,KN2000[TAB]
    lsw[TAB]Panel Memory[TAB]KN1000,KN800[TAB]
    efc[TAB]Effect Memory[TAB]KN7000,KN6000[TAB]
    msp[TAB]Manual Sequencer Pads[TAB]KN7000,KN6000[TAB]
    sqf[TAB]Sequencer Format[TAB]KN2000,KN1000,KN800[TAB]
    sqt[TAB]Sequencer[TAB]KN7000,KN6000[TAB]
    tm[TAB]Sound Memory[TAB]KN7000,KN6000,KN5000,KN3000,KN2000[TAB]
    cst[TAB]Custom Styles[TAB]KN7000,KN6000,KN5000,KN3000,KN2000[TAB]
    rcm[TAB]Custom Memory[TAB]KN5000[TAB]
    md[TAB]Midi Setting[TAB]KN5000[TAB]
    hmp[TAB]Homepage[TAB]KN7000,KN6000[TAB]
    lsw[TAB]Current Panel[TAB]KN7000,KN6000[TAB]
    fav[TAB]Favorites[TAB]KN7000,KN6000[TAB]
    ast[TAB]All Custom Styles[TAB]KN7000,KN6000[TAB]
    tlx[TAB]Technics Lyrics (Keysoft)[TAB]KN7000,KN6000[TAB]
    act[TAB]Action (Feature Presentation)[TAB]KN7000,KN6000[TAB]
    kif[TAB]Keyboard Information File (Keysoft)[TAB]KN7000,KN6000[TAB]
    ttx[TAB]Lange HD Dateinamen[TAB]KN7000,KN6000

    Sollten Euch noch andere Endungen bekannt sein dann postet hier mal.


    [Editiert durch MusikerLanze ein Dienstag, Juni 6, 2006 @ 13:51]

  2. #2
    Christian5000
    Gast

    Standard

    da stimmt aber einiges nicht :)

    das 5000er kann mehr :D

  3. #3
    Gast2089
    Gast

    Standard

    Hallo Christian,

    Lanze hat sich da viel Mühe gegeben, das aufzulisten, was möglich ist und außerdem den Hinweis: " Sollten Euch noch andere Endungen bekannt sein dann postet hier mal".

    Wenn du schreibst: " da stimmt aber einiges nicht
    das 5000er kann mehr ",

    solltest du kundtun, was nicht stimmt und Verbessern und ergänzen.

    Deine Aussage hat so "keine Hand und Fuß".

    Also: Was gibt es anderes?


  4. #4
    Christian5000
    Gast

    Standard

    ich hab auf den ersten blick ein paar fehlende gesehen, und wollte erst noch mal gucken was noch alles gibt in der 5000er welt, bevor ich drei mal anfange ;)

    cmp Composer (Rhythmen) KN7000,KN6000,KN5000,KN3000,KN2000
    pmt Panel Memory KN7000,KN6000,KN5000,KN3000,KN2000
    lsw Panel Memory KN1000,KN800
    efc Effect Memory KN7000,KN6000
    msp Manual Sequencer Pads KN7000,KN6000 KN5000KN3000
    sqf Sequencer Format KN2000,KN1000,KN800
    sqt Sequencer KN7000,KN6000
    tm Sound Memory KN7000,KN6000,KN5000,KN3000,KN2000
    cst Custom Styles KN7000,KN6000,KN5000,KN3000,KN2000
    rcm Custom Memory KN5000
    md Midi Setting KN5000
    hmp Homepage KN7000,KN6000
    lsw Current Panel KN7000,KN6000
    fav Favorites KN7000,KN6000
    ast All Custom Styles KN7000,KN6000
    tlx Technics Lyrics (Keysoft) KN7000,KN6000KN5000
    act Action (Feature Presentation) KN7000,KN6000
    kif Keyboard Information File (Keysoft) KN7000,KN6000
    ttx Lange HD Dateinamen KN7000,KN6000


    [Editiert durch Christian3500 ein Montag, Juni 5, 2006 @ 17:46]

  5. #5
    TomTom
    Gast

    Standard

    die 5000er kann tatsächlich "einiges" mehr! *kopfschüttel*

  6. #6
    Musiker Lanze
    Gast

    Standard

    Jungens die Liste is doch nich von mir, ich hab da auch nur `nen Teil dazu beigetragen.

    Und es geht doch nicht darum welches Key nun genau welche Dateiendungen verwendet sondern es geht um die Datei-Endung selber welche bekannt sind und welcher Funktion die dann zugeordnet wird.

    Ich find in den Postings aber keinen neuen Endungen oder hab ich falsch gelesen?
    Die Liste soll doch nur helfen Dateiendungen zuzuordnen.
    Und je nachdem welches Key ich habe hab ich doch dann auch einen der oben benannten Endungen und kann die Zuordnen auch wenn in der Liste hier das betreffende Key dann gar nicht angegeben ist.
    Also nicht gleich so eng sehen......


    [Editiert durch MusikerLanze ein Montag, Juni 5, 2006 @ 19:42]

  7. #7
    Musiker Lanze
    Gast

    Standard

    Hier mal noch zusätzlich eine komplette Liste der Filetypen.
    Die Liste stammt von der Webseite vom Gunnar Jonny und wurde Alec Pagida and Gunnar Jonny erarbeitet.

    TECHNICS KN RANGE FILE DESIGNATIONS AND OTHER DETAILS

    The following data is reproduced here by kind permission of Alec Pagida and Gunnar Jonny.
    The information was originally compiled by Alec and has been extracted from Gunnar’s website.

    TECHNICS Keyboard models :

    | KN800 | KN1000 | KN2000 | KN3000 | KN5000 | KN6000 | KN6500 | KN7000


    KN800 (1989)

    cmp - Composer file consisting of 8 patterns only, no intros, fills or endings. Bass, Drum and 3 Accomp tracks of limited polyphony (Accomp 3 would drop out at polyphony limit).
    lsw - Panel Memory, only 8.
    seq - Sequencer Song file, 1 song.
    tm - Sound Memory, 24 edited sounds.

    This machine had an optional memory card and optional plug-in floppy disk drive.
    ----------------------------------

    KN1000 (1991)

    cmp - Composer file consisting of 10 patterns, 1 intro, 1 ending, 2 fills. Bass, Drum, and 3 Accomp tracks where Accomp 2 and 3 now had greater programming polyphony.
    lsw - Panel Memory, still only 8.
    seq - Sequencer Song file, 1 song.
    sqf - Sequencer set up conditions (sequencer reset).
    tm - Sound Memory, now 30 edited sounds.

    Floppy disk drive now more commonplace and often sold with the machine. Could load 800 files.
    ---------------------------------

    KN2000 (1993)

    cmp - Composer now 2 banks of 6 patterns, 1 intro, 1 ending, 2 fills available for each bank. 5 part accompaniment, Bass, Drum & 3 Accomp parts with no polyphony problems now.
    lsw - Panel Memory, now 24, 3 banks of 8 each.
    seq - Sequencer Song file, 1 song.
    sqf - Sequencer set up conditions (sequencer reset).
    tm - Sound Memory, now 36 edited sounds.

    Disk drive now built in as standard. Could load 1000 files.
    Also KN1200 and module version AC1200 in 1994. Both of these machines had the same files as the KN2000, but with different file identifiers in the code.
    They had a mode to save files as KN2000 files rather than 1200 files, and this enabled 1200 files to be loaded into the KN2000.
    Up until this time, all the floppy drives had been DD drives using 720K disks.
    This led to problems if you used HD disks and formatted them as DD in the machine, and then wanted to load them into later machines like the 3000.
    Covering the disk type hole (not the write-protection hole) often allowed reading in these circumstances.
    -------------------------------------------------


    KN3000 (1995)

    cmp - Composer now 3 banks of 4 patterns each, 2 intro, 2 ending, 2 fills for each bank. 5 part accompaniment. Bass, Drums & 3 Accomp. Also Composer Chord Map allowing different patterns for major, minor, seventh and diminished chords.
    lsw - Panel Memory, 24, 3 banks of 8 each.
    msp - Manual Sequence Pads, 9 pads, 3 banks of 3 now with phrase programming.
    seq - Sequencer Song file, now 10 songs at once.
    sqf - Sequencer set up conditions (sequencer reset) for 10 songs.
    tm - Sound Memory, now 40 edited sounds.

    HD floppy drive, and hard disk option, sold as 3500 in some markets. Could load 2000 files.
    KN1500/920 in 1996. These keyboards would load 3000 format files, but the 3000 would not load 1500/920 files without first changing the code identifiers in the hex. Data.
    ---------------------------------------------


    KN5000 (1997)

    cmp - Composer, same contents as KN3000. Composer Chord Map dropped, also no more Dynamic Accompaniment on presets.
    lsw - new Current Panel memory file.
    msp - Manual Sequence Pads, 12 pads - 2 banks of 6.
    pmt - new Panel Memory file consisting of 10 banks of 8 memories each. Approx 76k if 10 banks saved, 7k8 if only 1 bank saved.
    sqt - new Sequencer file for 10 songs and setups.
    tm - Sound Memory, same contents as 3000.
    rcm - new Custom Rhythm section of 20 sets of composer patterns in flash memory.
    md - new midi user file, 3 setups in flash memory.

    Hard disk option with pc backup link available.
    Could load 2000 and 3000 files, also 1500 and 920. Also Style Conversion now available.
    KN1600/1400/930 in 1998. KN930 basically the same as the 920, but 1600/1400 incorporated features of the 5000 files, although obviously more limited (fewer Panel Memories, no Custom etc).

    By now the file sizes were getting so large that the number of saves on even a 1.4MB floppy were limited. Therefore it became important to selectively save and leave out files not needed in the save, in order to save space to fit more files on the floppy.
    A useful trick if saving single songs on the 3000, was to save twice, once as an 'all' file, and once sequencer only. Then delete the 'all' sequencer files, and substitute the sequencer only save files on the pc, re-numbering to suit.
    The 'all' files were now much smaller, enabling 15 or 17 files on floppy, rather than the normal 9 or 11.
    ------------------------------------------------

    KN6000 (1999)

    cmp
    - Composer, 3 banks of 4 variations, 4 intros, 4 endings and 8 fills each. Now 8 Part - 2 Drums, Bass and 5 Accompaniment.
    efc - new Effect Memory file with 50 DSPs.
    lsw - Current Panel memory.
    msp - Performance Pad files. Now 18 pads, 3 banks of 6 each, pads now 2 track with ability to control auto chord as well as follow.
    pmt - Panel Memory file of 13 banks of 8 memories each. Approx 9k6 if 13 banks saved, 2k6 if only 3 banks saved.
    sqt - Sequencer file, 10 songs and setups as per 5000.
    tm - Sound Memory, 40 sounds and drum kit now with full edit suite.
    ast - Custom Style section in flash memory. Now 20 complete styles, each style with 20 composer patterns, 4 registrations , 6 performance pads, and any edited sounds, drums, effects
    fav - 4 Favorites Pages of individually programmable menu functions in flash memory.
    hmp - the individually programmable Home Page in flash memory.
    md - 3 User Midi setups in flash memory.
    cst - a single Custom Style in flash memory. 20 composer patterns, 4 registrations, 6 pads etc.

    Two hard disk options available, from third party source - professional SX6 and domestic SX3.
    2 programmable stereo send and returns and clearer karaoke display with Technics lyrics on the SX6. PC backup and programming link promised for SX6.
    Can load 2000, 3000, 5000, 1600 and 1400 files. Style Converter as per 5000.
    Provision for 2 expansion cards inside the keyboard body.
    ----------------------------------------------

    KN6500 (2001)

    All information same as KN6000.

    The 6500/6000 has compression on all these files so loading is much faster than 5000 or 3000.
    20 normal files can easily be accommodated on a HD floppy with plenty of room to spare, for instance another 80 or 90 single custom styles, which load in 1 second each, can be saved too.
    More than 120 single customs can be accommodated on a blank HD floppy.
    The 4 pages of programmable menu shortcuts and the programmable home page take little space, so it is easy to load different versions of these with different files, eg a home page with information for song playback loaded with songs, and a home page with information for pattern & registration loaded with these files.
    ----------------------------------------------

    KN7000 (2002)

    cmp - Composer, 3 banks of 4 variations, 4 intros, 4 endings and 8 fills each. 8 Part - 2 Drums, Bass and 5 Accompaniment.
    efc - Effect Memory file with 50 DSPs.
    lsw - Current Panel memory.
    msp - Performance Pad files. 18 pads, 3 banks of 6 each, pads 2 track with ability to control auto chord as well as follow.
    pmt - Panel Memory file of 13 banks of 8 memories each. Approx 45k if 13 banks saved, 10k if only 3 banks saved.
    sqt - Sequencer file, 10 songs and setups as per 5000.
    tm - Sound Memory, 40 sounds and drum kit with full edit suite.
    ast - Custom Style section in flash memory. 20 complete styles, each style with 20 composer patterns, 4 registrations , 6 performance pads, and any edited sounds, drums, effects
    fav - 4 Favorites Pages of individually programmable menu functions in flash memory.
    hmp - The individually programmable Home Page in flash memory.
    md - 3 User Midi setups in flash memory.
    cst - A single Custom Style in flash memory. 20 composer patterns, 4 registrations, 6 pads etc.
    act – A new hidden file containing script for slideshows in sequencer rather than demo memory.

Ähnliche Themen

  1. Antworten: 8
    Letzter Beitrag: 21.09.2011, 10:39
  2. Hier mal alle mir bekannten Anbieter für neues Song-Style & Soundfutter für Technics
    Von Musiker Lanze im Forum Test- und Erfahrungsberichte
    Antworten: 8
    Letzter Beitrag: 21.09.2011, 10:39
  3. Kostenlose Downloads für fast alle Technics Keys
    Von Musiker Lanze im Forum Noten, Texte, Midi-Files, Musiksoftware
    Antworten: 0
    Letzter Beitrag: 04.11.2010, 23:29
  4. Alle mir bekannten "Quick-Load-Funktionen" bei Technics Keys
    Von Musiker Lanze im Forum Workshops, Tipps und Tricks rund um die Technics Keys
    Antworten: 1
    Letzter Beitrag: 22.04.2006, 12:31

Berechtigungen

  • Neue Themen erstellen: Nein
  • Themen beantworten: Nein
  • Anhänge hochladen: Nein
  • Beiträge bearbeiten: Nein
  •